CentOSLinuxTutorials

How To Install Spacewalk on CentOS 6

Install Spacewalk on CentOS 6

In this tutorial, we will show you how to install Spacewalk on CentOS 6. For those of you who didn’t know, Spacewalk is the package and system management solution for Redhat-derived Linux operating systems such as CentOS, Scientific Linux, and Fedora, by the spacewalk community. It is released under the GPLv2 license. It offers a more flexible way to do it. Spacewalk enables you to inventory your systems, manage configuration, act as a central repository for your systems, monitor your systems, and so on.

This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple. I will show you the step-by-step installation of Spacewalk on CentOS 6.

Prerequisites

  • A server running one of the following operating systems: CentOS 6.
  • It’s recommended that you use a fresh OS install to prevent any potential issues.
  • SSH access to the server (or just open Terminal if you’re on a desktop).
  • A non-root sudo user or access to the root user. We recommend acting as a non-root sudo user, however, as you can harm your system if you’re not careful when acting as the root.

Install Spacewalk on CentOS 6

Step 1. First, you need to enable a repository on your system.

rpm -Uvh http://yum.spacewalkproject.org/2.0/RHEL/6/x86_64/spacewalk-repo-2.0-3.el6.noarch.rpm
rpm -Uvh http://mirror.muntinternet.net/pub/epel/6/i386/epel-release-6-8.noarch.rpm
wget http://www.jpackage.org/jpackage50.repo
mv jpackage50.repo /etc/yum.repos.d/

Step 2. Install PostgreSQL database.

Spacewalk uses a database to store its primary data, it supports either  PostgreSQL or Oracle RDBMS. In our case we are using PostgreSQL:

yum install spacewalk-setup-postgresql -y

Step 3. Install Spacewalk.

yum install spacewalk-postgresql -y

Step 4. Configure Spacewalk.

If you have installed an embedded database, then use it. It will ask you to enter the admin mail and organization details to generate the self-signed certificate for secured access:

[root@idroot.us ~]# spacewalk-setup --disconnected
** Database: Setting up database connection for PostgreSQL backend.
** Database: Installing the database:
** Database: This is a long process that is logged in:
** Database:   /var/log/rhn/install_db.log
*** Progress: #
** Database: Installation complete.
** Database: Populating database.
*** Progress: ####################################
* Setting up users and groups.
** GPG: Initializing GPG and importing key.
** GPG: Creating /root/.gnupg directory
You must enter an email address.
Admin Email Address? admin@idroot.us
* Performing initial configuration.
* Activating Spacewalk.
** Loading Spacewalk Certificate.
** Verifying certificate locally.
** Activating Spacewalk.
* Enabling Monitoring.
* Configuring apache SSL virtual host.
Should setup configure apache's default ssl server for you (saves original ssl.conf) [Y]? 
** /etc/httpd/conf.d/ssl.conf has been backed up to ssl.conf-swsave
* Configuring tomcat.
** /etc/sysconfig//tomcat6 has been backed up to tomcat6-swsave
** /etc/tomcat6//server.xml has been backed up to server.xml-swsave
** /etc/tomcat6//web.xml has been backed up to web.xml-swsave
* Configuring jabberd.
* Creating SSL certificates.
CA certificate password? 
Re-enter CA certificate password? 
Organization? idroot.us
Organization Unit [server.idroot.us]? 
Email Address [admin@idroot.us]? 
City? jogja
State? indonesia
Country code (Examples: "US", "JP", "IN", or type "?" to see a list)? SI
** SSL: Generating CA certificate.
** SSL: Deploying CA certificate.
** SSL: Generating server certificate.
** SSL: Storing SSL certificates.
* Deploying configuration files.
* Update configuration in database.
* Setting up Cobbler..
Processing /etc/cobbler/modules.conf
`/etc/cobbler/modules.conf' -> `/etc/cobbler/modules.conf-swsave'
Processing /etc/cobbler/settings
`/etc/cobbler/settings' -> `/etc/cobbler/settings-swsave'
Cobbler requires tftp and xinetd services be turned on for PXE provisioning functionality. Enable these services [Y]? 
* Restarting services.
Installation complete.
Visit https://server.idroot.us to create the Spacewalk administrator account.

On complete, start the SpaceWalk service:

/usr/sbin/spacewalk-service start
chkconfig spacewalk on

Step 5. Accessing Spacewalk.

The spacewalk will be available on HTTPS port 443 by default. Open your favorite browser and navigate to https://hostname.yourdomain.com and complete the required steps to finish the installation. If you are using a firewall, please open ports 80 and 443 to enable access to the control panel.

Congratulations! You have successfully installed Spacewalk. Thanks for using this tutorial for installing the Spacewalk server on CentOS 6 system. For additional help or useful information, we recommend you check the official Spacewalk website.

VPS Manage Service Offer
If you don’t have time to do all of this stuff, or if this is not your area of expertise, we offer a service to do “VPS Manage Service Offer”, starting from $10 (Paypal payment). Please contact us to get the best deal!

r00t

r00t is a seasoned Linux system administrator with a wealth of experience in the field. Known for his contributions to idroot.us, r00t has authored numerous tutorials and guides, helping users navigate the complexities of Linux systems. His expertise spans across various Linux distributions, including Ubuntu, CentOS, and Debian. r00t's work is characterized by his ability to simplify complex concepts, making Linux more accessible to users of all skill levels. His dedication to the Linux community and his commitment to sharing knowledge makes him a respected figure in the field.
Back to top button